Categories

False alarms and system glitches can be frustrating, and even more concerning, might prevent your home’s security from working how it should. Thankfully, most problems, from false alarms to dead batteries, are straightforward to fix. Take a look at our recommendations for troubleshooting your home alarm system in Gulfport. We’ll help keep your family members safe and your system running the way it should.

Test Your Home Security System In Gulfport

One of the best ways to troubleshoot your home’s security is to test it! Newer systems have a test mode so you don’t mistakenly prompt an emergency response from monitoring agents. Once you’re in test mode, follow these steps:

• Turn on your system as you normally would when leaving.
• Open a window or door that has a contact sensor, or try to trigger another sensor. Shut the door or window so it doesn’t prompt the alarm when you turn the system back on.
• Allow the alarm to go off for 60 seconds to make sure a transmission is dispatched to the security company and an entry is made in the alarm system log.
• Continue testing sensors as needed
• Check the systems’s activity log to confirm functionality.

Don’t worry, monitoring agents will be able to see that your alarm system is involved in a test. Be sure to switch off test mode when you’re done. It’s smart to test once a month or anytime you adjust your home’s internet or phone service.

Check The Placement And Condition Of Motion Detectors

Although an integral element of your alarm system, motion sensors are prone to false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Conduct a physical check. Is there anything that could shift within range of the sensor, like drapery taken by a breeze?
• Is the sensor clean? Cobwebs, dirt, and grime can lead to malfunctions. Check to confirm the sensor is clean.
• Does the motion detector offer pet immunity you can turn on? Some sensors can be programmed to ignore pets weighing up to 100 pounds.
• When was the battery replaced? Low batteries can impact performance or cause false alarms.
• Is a heat source impacting the sensor? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Notifications

One helpful perk of the latest home security systems is that they’ll notify you when batteries are getting low. If your system has a mobile app or control panel, you’ll usually discover messages there. Depending on your system, you could detect an occasional beep when batteries are getting low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every 1 to 2 years. It’s a good idea to keep batteries on hand and establish a replacement schedule. Top systems also include a backup battery for the primary control panel. This battery helps keep your system functioning if your power goes out and should recharge once power is back online. If it doesn’t recharge, you will have to replace it.

Troubleshooting Is Easy With ADT Home Security In Gulfport 

As the foremost name in home security, ADT designs systems that provide unsurpassed functionality and protection. Switching to test mode is simple through MyADT.com or the ADT+ app, and you’ll always receive notifications when a sensor battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Gulfport home and family. Place a call to (228) 220-2891 or complete our form today!